> -----Original Message-----
> From: Jon Steiger [SMTP:stei0302@cs.fredonia.edu]
> Sent: Tuesday, January 04, 2000 4:10 PM
> To: 'dakota-truck@buffnet.net'
> Subject: Re: DML: RE: Re: 180 degree thermo (install)
>
[Jarman, Mike] Thanks Jon, sounds simple enough now that i see a
good picture.
> When you remove the thermostat housing, you'll notice that there is a
> little tab on it, down near the bottom. That tab is supposed to face
> towards
> the front when you re-install.
>
> Here's a drawing of it:
>
> http://www.cs.fredonia.edu/~stei0302/WWW/DAKOTA/UPGRADES/TSTAT/10.gif
>
> You can see the little tab on the housing.
>
>
> -Jon-
>
> .--- jon@dakota-truck.net -- or -- stei0302@cs.fredonia.edu
> ------------.
> | Jon Steiger * AOPA, DoD, EAA, MP Race Team, NMA, SPA, USUA * RP-SEL
> |
> | '92 Ram 150 4x4 V8, '96 Dakota V8, '96 Intruder 1400, '96 FireFly 447
> |
> `---------------------------- http://www.cs.fredonia.edu/~stei0302/ ---'
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:46:27 EDT
