You could use them together, IF and I recomend it Buy yourself two nice size
capacitors designed for whatever size amps you may have they get wired to
the amp at the positive battery connection or you can place them both
(Battey con and capacitor) on an external wire block and connect the amp to
it.
.In case you dont know> what this does is when the amps dont require a lot
of charge the Alt will fill the capacitors then when the amp needs some
extra juice it will pull it from the caps NOT from your battery. This will
allow the ALT to still provide enough juice for the normal load to your
accessories and charge the battery. You could also consider a higher output
Alternator than stock. That way when you have underdrive pullies on you
still get at least as much juice as you had with the stock. It doesnt take
much more energy to turn the HO compared to stock so you will not be
defeating the gains you get from the pulleys.
> -----Original Message-----
> From: Eric Giblock [SMTP:egiblock@hotmail.com]
> Sent: Wednesday, January 05, 2000 2:06 AM
> To: dakota-truck@buffnet.net
> Subject: Re: DML: pulley
>
> ----- Original Message -----
> From: <DGianetti@aol.com>
> To: <dakota-truck@buffnet.net>
> Sent: Tuesday, January 04, 2000 7:46 AM
> Subject: Re: DML: pulley
>
>
> > with underdrive pulleys thay tell you that you should not
> > use a stereo system other then the factory one.
> > , just thought you should know
> >
>
> with that in mind, i would have been in deep crap if i followed up with
> one....
>
> thanks for the info..
>
> :)
>
>
>
> -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
> Eric Giblock egiblock@hotmail.com
> http://members.aol.com/dakotadogg DakotaDogg's Web Page
>
> Get Paid to Surf The Internet ! (it works, i got a check)
> http://www.alladvantage.com/go.asp?refid=EEX702
>
> -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:46:27 EDT