no probs in Raleigh, sitting through 10min redlights, temp needle never got
to the 1/2 normal mark on the dummy gauge. wander if it'll work on a 360
*when* i swap out the 318 =)
______________________
Jon Smith----Raleigh, NC---
fast4x4@bellsouth.net
www4.ncsu.edu/~jdsmith4
ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ
----- Original Message -----
From: "Muscara, Anthony F" <MuscaraAF@state.gov>
To: <dakota-truck@buffnet.net>
Sent: Monday, January 10, 2000 1:16 PM
Subject: DML: RE: RE: Re: some mods that are rarely mentioned
> Nope, Hayden 16" isn't quite enough for a 318 in summertime, especially if
> you're stuck in traffic in Washington, DC. (My experience.) Scary, seeing
> the temp gauge shoot up to 260 and the red "Check Gauges" light come on.
>
> -----Original Message-----
> From: Bernd D. Ratsch [SMTP:bernd@texas.net]
> Sent: Sunday, January 09, 2000 10:17 AM
> To: dakota-truck@buffnet.net
> Subject: DML: RE: Re: some mods that are rarely mentioned
>
> On the V6, the Hayden 16" works just fine...even in 100+ weather.
> On a V8,
> i'm not sure if that's going to be enough.
>
> - Bernd
>
> -----Original Message-----
> From: owner-dakota-truck@buffnet.net
> To: dakota-truck@buffnet.net
> Subject: DML: Re: some mods that are rarely mentioned
>
>
> I just installed a 16" fan, like Jon Smith... but i dunno how much
> CFM his
> is... mine is 1600+ CFM, and it only cost $80 for the t-stat, and it
> came
> with a Override switch.... (Gotta mount it today,,,)
> But as the temp wasnt much over 40's You think 16" and 1600 CFM
> will be
> ok, or will I need to mount another fan elsewhere, like a 10" or
> something...
>
> Anyone?
> __________________________________________________________
> Tim Berry -- Chesapeake, VA
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:46:34 EDT