RE: Sealed Ball Joints was: brown goo on my wheel

• Next message: FalRan66@aol.com: "Re: Re[2]: Snow in NH (finally)"
• Previous message: Johnson Sgt Michael D: "Warranty Work"
• Maybe in reply to: GS-: "Sealed Ball Joints was: brown goo on my wheel"
• Next in thread: SS454454@aol.com: "Re: Re[2]: brown goo on my wheel"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

GS,
Correct on the ball joints. Regarding the wheel bearings, I would look into
that one though. I think I'm going to do this on another vehicle I have
also; if possible.
Rich

-----Original Message-----
From: GS- [mailto:GSWillhite@ualr.edu]
Sent: Wednesday, January 12, 2000 4:33 PM
To: dakota-truck@buffnet.net
Subject: Re: Sealed Ball Joints was: DML: brown goo on my wheel

Rich, just an after thought, I bet the ball joints are
sealed in hard rubber. Zerks would be no help in this
case. Oh well.

GS -

Wisotzkey, Rich wrote:
>
> GS,
> If you can figure a way to get jerk fittings in there, do it. It will
> definetly help.
> Rich - Ashburn, VA
> P.S. Remember though; what goes in, must come out! Don't forget to also
> drill a hole for the old grease to escape from.
>

• Next message: FalRan66@aol.com: "Re: Re[2]: Snow in NH (finally)"
• Previous message: Johnson Sgt Michael D: "Warranty Work"
• Maybe in reply to: GS-: "Sealed Ball Joints was: brown goo on my wheel"
• Next in thread: SS454454@aol.com: "Re: Re[2]: brown goo on my wheel"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:46:44 EDT