Re: High Quality Head Gaskets

From: Mike Schwall (mschwall@flash.net)
Date: Thu Jan 20 2000 - 12:16:29 EST


At 11:14 PM 1/19/2000 -0500, you wrote:
>Supercharger, need something high quality that won't blow

I don't know your intended horse power output, but if it's under 300HP with
less than 8psi of boost, then look into the Fel-Pro performance
gasket. It's a perma-torque style gasket. Put some Permatex Copper-Kote
around the water ports and piston bores and your set. If you want the best
gasket, get the block O-ringed and go with copper. Milodon, SCE, and
plenty others make copper head gaskets for high horsepower engines. If you
don't plan to go over 300HP, save the green and get Fel-Pro. Fel-Pro and
many others can be found in the PAW catalog - http://www.pawinc.com Or
call Summit or Jegs and have them order you one.

Mike

Mike

__________________________
mschwall@flash.net



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:46:56 EDT