Yes, it will require a longer belt as the adapter will move the A/C
compressor over 1.0" and up 0.75", so the belt will probably need to be
about 1.25" longer.
Clay
84 Dodge Ram, scrappin pavement w/ 440 8bbl
96 Indy Ram, scrappin EVERYTHING w/ 360 Magnum!' -(www.indyram.org)
69 Road Runner 440 6bbl, project car
http://expert.cc.purdue.edu/~cooke
On Thu, 10 Feb 2000 durling@attglobal.net wrote:
> Do you think it's going to require a different belt?
>
> Jeff Durling - very interested!!!
> '96 RC Sport - 318
>
> Clay Cooke wrote:
>
> > Great page Jon!!! All the info anyone would ever need to put that intake
> > on!!! and the install kits look great!! Who did the machine work on the
> > vaccum tree and the ECT adapter?? Great Great Great!!
> >
> > And yes, Im slowly working on the A/C relocation bracket, should have it
> > done some time in the near future :) keep fingers crossed!!!
> >
> > Clay
> >
> > 84 Dodge Ram, scrappin pavement w/ 440 8bbl
> > 96 Indy Ram, scrappin EVERYTHING w/ 360 Magnum!' -(www.indyram.org)
> > 69 Road Runner 440 6bbl, project car
> >
> > http://expert.cc.purdue.edu/~cooke
> >
> > On Thu, 10 Feb 2000, Jon Steiger wrote:
> >
> > >
> > >
> > > On Wed, 9 Feb 2000 durling@attglobal.net wrote:
> > >
> > > > Just curious what do you plan on making the AC bracket out of and how do you work
> > > > around moving the sensor that has to be moved. Just curious...very curious.....when
> > > > you shipping that thing anyway? I can't seem to wait anymore.......engine goodies,
> > > > must have engine goodies...aaahhhhhhh.
> > >
> > >
> > > Actually, Clay is the person working on the A/C bracket angle. I
> > > may take a look at that in the future, but with my install kits as they
> > > currently are, in order to retain your A/C, you need to cut off a corner
> > > of your A/C compressor.
> > >
> > > As far as the sensor goes, I designed a fitting that goes in the upper
> > > radiator hose which will allow you to mount the sensor there.
> > >
> > > I've just put my MPI install guide on-line. You can check out all of
> > > the gory details at:
> > >
> > > http://www.cs.fredonia.edu/~stei0302/www/dakota/upgrades/mpi
> > >
> > > I guess everything is set to ship as of right now. :-) I'll send
> > > a seperate post to the DML right now with the info.
> > >
> > >
> > > -Jon-
> > >
> > > .--- jon@dakota-truck.net -- or -- stei0302@cs.fredonia.edu ------------.
> > > | Jon Steiger * AOPA, DoD, EAA, MP Race Team, NMA, SPA, USUA * RP-SEL |
> > > | '92 Ram 150 4x4 V8, '96 Dakota V8, '96 Intruder 1400, '96 FireFly 447 |
> > > `---------------------------- http://www.cs.fredonia.edu/~stei0302/ ---'
> > >
> > >
> > >
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:48:01 EDT