<
<On my '00 the 194's holder is the same diamert as teh outside of teh tube
<it should fit into... does this make sense the way I described it?
<
<Chris
<
Yes it makes sense, look at your stock lenses. You need to dremel off that
"tube" to make it flush. You will also have to grind a little off of the side
to
make clearance for the "holder," you will notice the stock ones have a
recess built in for the "holder." Do yourself a favor while your at it, grab
the
wire harness behind the headlights, and the leads to the lights, and push
out some slack to work with. The torx is a T-10, but my stinkin 1/4" drive
bit wasn't long enough, I wound up jamming a 2mm allen wrench in it.
I must say they were worth the 3 week wait, dremel mods, and buying my
own amber bulbs.
Marc Federici
99 SLT+ CC 5.2 5sp 4x2 3.55sg
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:48:36 EDT