You can order online via the net for AutoZone. I have done this previously
with a 94 Astro CS (4.3 HO-same engine from the Syclone).
-----------------------------------------------------------------
Steven St.Laurent
Test Engineer
Test Branch, GSD,MCTSSA
MARCORSYSCOM, US Marine Corps
mailto:stlaurents@mctssa.usmc.mil (work)
mailto:Saint1958@home.com (home)
Office: (760) 725-2296
-----Original Message-----
From: Greig, Doug [mailto:douggr@hazelett.com]
Sent: Wednesday, February 23, 2000 6:24 AM
To: dakota-truck@buffnet.net
Subject: DML: Poly Bushings Part Deux
I want to replace all of the stock bushings on my suspension to
polyeurothane(?). Has anyone done this without using a lift kit. I've
checked JCWhitney, Energy Susupensions.com, and a couple of other websites,
but haven't found anything for a late model 4X4. If I had a 96 or older or a
2wd, I would be set. I also want to do the upgrade the ball joints to a
heavier duty unit. Where do I go? I could try a local auto parts store, but
you never know. We don't have any Autozone's or Pepboys around here, so I'm
stuck with the mom and pop shop's for now.
Thanks in Advance,
Doug Greig
98 CC 4X4 V6 Sport
South Burlington Vermont
Douggr@hazelett.com <mailto:Douggr@hazelett.com>
Dkgreig@msn.com <mailto:Dkgreig@msn.com>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:48:39 EDT