In a message dated 02/25/2000 2:11:26 AM !!!First Boot!!!, bernd@texas.net
writes:
<< What was done there is an old trick to gain cubic inches by replacing the
crank/rods with that from a 400CID Chevy engine. The bore was increased by
.030" (mainly to get to the "383" number) but the stroke is what makes the
biggest difference in the displacement. >>
hehehe actually in order to get a 383 out of a 350 cid you do the following
bore .030 over and ADD a 400 cid crank you use the stock 350 rods you need
to change the crank
Rob
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:48:47 EDT