Well I wish I had em right now, I dont, but a guy I know has em on his. He
loves em, knocked his 60' time down by .2 to .3 tenths with no other
mods!!
I want a set, problem is I have a 6" drop on the back of my Ram and that
puts the axle on top of the springs, Caltrax says they will make it work,
but communication is slow going right now...
Clay
84 Dodge Ram, scrapin pavement w/ 440 8bbl
96 Indy Ram, scrapin EVERYTHING w/ 360 Magnum!' -(www.indyram.org)
69 Road Runner 440 6bbl, project car
http://expert.cc.purdue.edu/~cooke
On Wed, 1 Mar 2000, Thomas Vacchino wrote:
> Clay:
> How do you like the bars on your truck?................. I was originally
> looking @ the Rancho bars. But they don't make them for my DAK.
>
> "psychonaut"
>
> Clay Cooke wrote:
>
> > They make them for full size rams and they are over the spring as well...
> > and they work!!
> >
> > Clay
> >
> > 84 Dodge Ram, scrapin pavement w/ 440 8bbl
> > 96 Indy Ram, scrapin EVERYTHING w/ 360 Magnum!' -(www.indyram.org)
> > 69 Road Runner 440 6bbl, project car
> >
> > http://expert.cc.purdue.edu/~cooke
> >
> > On Wed, 1 Mar 2000, Steven T. Ekstrand wrote:
> >
> > > Aren't 4x4's Axle under spring? If so, I don't see how the bars could
> > > work.
> > >
> > > Steve Ekstrand, Pasadena, CA Driver: '00 Dakota CC SLT+ 4.7L 3.92SG 255's
> > > Stacey's Driver: '00 Inferno Red Intrepid ES-3.2L-24V Autostick w/Leather
> > > Race Car: 69 1/2 Road Runner 440-6 (ex-NHRA SS/GA future B or C/SA???)
> > > Project Car: 69 Barracuda Notchback (Orig. 318, now 360w/Edelbrock Heads)
> > > Homepage: http://sites.netscape.net/professormopar/homepage
> > >
> > >
> > >
> > >
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:49:30 EDT