While you have the heads off the engine, you can have the ports
(Intake/Exhaust) cleaned up as well for a little bit more power...port
matching at minimum. The rollers will increase the redline slightly
(happened to a few DML'ers who've installed them) by about 250rpm.
Otherwise, sounds like a good combo.
- Bernd
----- Original Message -----
From: <Bluethunder318@aol.com>
To: <dakota-truck@buffnet.net>
Sent: Friday, March 03, 2000 2:58 PM
Subject: DML: Can someone recommend a combo for my motor.????98 318....
> I have 98 4x4 sport 318 w/31x10.5/15 tires and rim. I have
> cat--back,headers,R+D tb, and intake. I was thinking of doing 1:7 roller
> rockers, Mopar 204/208 cam, and minor head work(3angle valve job,clean up
> intake and exhaust).
> Is this a good combo for my truck? I don't want to be revving to 5500. the
> stock 5200
> rpm shift point is what i want. i also have a auto tranny(A-518). 4.10
gears
> are also in my future,don't know when though:)
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:49:31 EDT