Yes! For a 318.00 George Washington drawings from MOPARPARTS.COM. (2000
model)
-----------------------------------------------------------------
Steven St.Laurent
Test Engineer
Test Branch, GSD,MCTSSA
MARCORSYSCOM, US Marine Corps
mailto:stlaurents@mctssa.usmc.mil (work)
mailto:Saint1958@home.com (home)
Office: (760) 725-2296
-----Original Message-----
From: Patrick Delgado [mailto:dadoctah@vitelcom.net]
Sent: Friday, March 03, 2000 2:12 PM
To: dakota-truck@buffnet.net
Subject: Re: DML: RE: R/T with Magnum R/T package
Sounds good to me. Seems like the only missing ingredient is the Mopar
computer. Is it available? I know it added alot in the previous versions. I
may go cat-less and hold off on the hotchkis . Any interference problems
with
the rockers?
Dr. Pat
Sam Parthemer wrote:
> I have an RC R/T, Mopar Headers, Crower Roller Rockers (1.7) which are
> supposed to be equivalent to the RT Cam & 1.6 rockers, and K&N GEN II
> air cleaner. I ran a 15.010 in 65 F. temps without the rockers. Haven't
> run with them yet, but I can fell quite a difference in low-mid/top end.
> I did dyno the truck stock vs. the 3 mods.. 204 hp/270 ft/lbs...stock...
> 227 hp/320 ft/lbs. with those 3 mods. Drives great... Oh yeah, and I
> have the Hotchkis suspension kit on too.. I figure the truck runs in
> the high 14's now easily, and that's through the stock exhaust/headers!
> 0-60 in the 6.5 second range. '98-99 RT's had 19# fuel inj, whereas the
> '00 has 24# fuel inj... The truck OEM stock ran better than my '99 did.
>
> Need more info, let me know.
>
> Sam '00 RT
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:49:31 EDT