At 06:28 PM 3/8/2000 , you wrote:
> Crower has a 204/213 dur cam. It gets 508/535" of lift
>with 1.7 roller rockers. This sounds good. Hughes recommended me a cam that
>gets 512/512" of lift for my application,its a 208/214 dur and makes that
>lift with 1.6 rockers. Which cam do you guys think I should go with? I want
>to get their stage 1 heads also.
>Mike.Travalja ,98 4x4 sport CC 318---3.55 gears,and 31x10.5/15's(want
>3.92's)auto-t
> R+D TB
> 14" K+N
>Mopar headers
>Flowmaster 2-chamber cat-back
>B.T.W----i don't want to lose low-end,i want power to 5500 max.
That 204/213 is what is called an RV cam. Stock idle with increased low
end torque over factory, slightly better performance over stock. The
208/214 is a entry level street performance cam. Good low end with
improved mid-range power. It would satisfy your 5500 max power RPM. With
that cam you should still pull 18 in/Hg at idle with no problem. Idle will
still be stock, with a noticeable "ballsy" sound in the exhaust. It would
sound pretty good with your Flowmasters. Get the 3.92 gears.
What is their Stage 1 heads? Not familiar with their products.
Mike
__________________________
mschwall@flash.net
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:49:34 EDT