RE: RATINGS NEED Re: Steven

From: Barret, Matt (MATT_BARRET@earthtech.com)
Date: Fri Mar 17 2000 - 14:56:09 EST


Ok then, what weight are you using for the CC 4.7L and a CC R/T???
I know what my truck weighs, its 3670, only difference in weight over the RT
should be the engine, which is about 70 pounds Max. so where is the "BIG"
difference you're talking about.
Lets see some numbers, and not just this "much" more stuff??!!!?
Much lighter???? what 100 pounds, that aint much!!!
Please explain???
__________________________________
Matt -- Mechanicsville, VA Y2K-HEMI
`00 Sport Plus 4.7L 5spd. 9 1/4 3.92 LSD
RC 2x4 Homemade intake & K&N open element,
Traction Bars, Spring clamps
BEST 1/4 14.80 @ 90.97 MPH
ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>
-----Original Message-----
From: Stlaurent Mr Steven [mailto:STLAURENTS@mctssa.usmc.mil]
Sent: Friday, March 17, 2000 2:43 PM
To: 'dakota-truck@buffnet.net'
Subject: DML: RE: RE: RE: RE: HP RATINGS NEED

Let us try that again the CC 4.7 is much lighter than the R/T 5.9 CC. The
numbers are upside down.

-----------------------------------------------------------------
Steven St.Laurent
Test Engineer
Test Branch, GSD,MCTSSA
MARCORSYSCOM, US Marine Corps
mailto:stlaurents@mctssa.usmc.mil (work)
mailto:Saint1958@home.com (home)
Office: (760) 725-2296

-----Original Message-----
From: Barret, Matt [mailto:MATT_BARRET@earthtech.com]
Sent: Friday, March 17, 2000 7:54 AM
To: 'dakota-truck@buffnet.net'
Subject: DML: RE: RE: RE: HP RATINGS NEED

Weight ratio? of what, the engine itself?? yea, the 4.7L weighs about 60 or
70 pounds less.
Compare it to the truck weight, like the HP to weight ratio, ok, There is
very little difference.
The 5.9 would be .066 hp per lb, and 4.7 is .064 hp per pound.
furthermore, the 4.7L is 73 cubes smaller and has about 35 lbs less torque.
What are you comparing Steven??

__________________________________
Matt -- Mechanicsville, VA Y2K-HEMI
`00 Sport Plus 4.7L 5spd. 9 1/4 3.92 LSD
RC 2x4 Homemade intake & K&N open element,
Traction Bars, Spring clamps
BEST 1/4 14.80 @ 90.97 MPH
ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ

-----Original Message-----
From: Stlaurent Mr Steven [mailto:STLAURENTS@mctssa.usmc.mil]
Sent: Friday, March 17, 2000 10:13 AM
To: 'dakota-truck@buffnet.net'
Subject: DML: RE: RE: HP RATINGS NEEDING

Matt;

Now compare the weight ratio versus HP (ensure they have the same rear gears
/ Tranny).

-----------------------------------------------------------------
Steven St.Laurent
Test Engineer
Test Branch, GSD,MCTSSA
MARCORSYSCOM, US Marine Corps
mailto:stlaurents@mctssa.usmc.mil (work)
mailto:Saint1958@home.com (home)
Office: (760) 725-2296

-----Original Message-----
From: Barret, Matt [mailto:MATT_BARRET@earthtech.com]
Sent: Friday, March 17, 2000 5:40 AM
To: 'dakota-truck@buffnet.net'
Subject: DML: RE: HP RATINGS NEEDING

5.9 is 250 and the 4.7 is 235.

__________________________________
Matt -- Mechanicsville, VA Y2K-HEMI
`00 Sport Plus 4.7L 5spd. 9 1/4 3.92 LSD
RC 2x4 Homemade intake & K&N open element,
Traction Bars, Spring clamps
BEST 1/4 14.80 @ 90.97 MPH
ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
<<<

-----Original Message-----
From: Morrison, Dennis [mailto:DMorriso@ciena.com]
Sent: Friday, March 17, 2000 8:27 AM
To: dakota-truck@buffnet.net
Subject: DML: HP RATINGS NEEDING

What is a stock R/T 5.9 and stock 4.7 HP rating? I am doing a little
reaserch and need the info.

Thanx in advance.
Dennis



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:49:46 EDT