I believe it is rated at 250 hp, 335 Ft./lbs.s of
torque, or roughly.. 250 x .8 = 200 hp at the wheels,
and 335 x .8 = 268 ft./lbs. of torque. That's real
close, as my '00 RT stock did 203 hp @ 270 ft/lbs...
I recently dyno'd it again after headers, 1.7s, and
Gen II.. 227 hp & 320 ft/lbs... or 227 /.8= 283.5 hp
and 320 /.8 = 400 ft/lbs at the flywheel. Probably
+-5% of those figures would be a good range. The 4.7L
with a 5 spd would be hp x .82 to get rwl HP/torque.
Sam '00 RT
--- Kyle Kozubal <grndak4x4@home.com> wrote:
>
> ----- Original Message -----
> From: Frank Johnson <frankwjohnson@hotmail.com>
> To: <dakota-truck@buffnet.net>
> Sent: Tuesday, March 21, 2000 11:23 AM
> Subject: Re: DML: HP AND TORQUE NEEDED
>
>
> > 4.7 is 235 hp and 295 ft/lbs
> > 5.9 is 250 hp and ??? ft/lbs--dunno
> >
> > Frank WJ
> >
> >
> > >
> > >Ok the other day I got the HP ratings for the
> 4.7L and the 5.9L R/T now
> > >(sorry) but can I get the torque ratings on these
> two?
> > >
> > >4.7L = xxx HP & xxx Torque
> > >5.9L = xxx HP & xxx Torque (R/T)
> > >
> > >TIA
> > >Dennis
> >
> >
>
______________________________________________________
> > Get Your Private, Free Email at
> http://www.hotmail.com
> >
>
>
__________________________________________________
Do You Yahoo!?
Talk to your friends online with Yahoo! Messenger.
http://im.yahoo.com
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:49:54 EDT