Re: Open to LSD diff conversion, need advice on fluids!!

From: Kyle Kozubal (grndak4x4@home.com)
Date: Fri Mar 24 2000 - 20:56:02 EST


 << Ok I'm about to tackle this tonight after an entire week of itching for
> the traction! I'm going to go to pep boys to go pick up the fluid I'll
need.
> What kind should I use, and how much of it will I need?? I don't have the
book
> with me (they need to make a wallet-sized edition of the service manual).
> And that friction modifier, do I HAVE TO go to the dealer to get it?? I
gotta
> drive 20 minutes to get there, and I'm trying to do this on my lunch
break.
> Any 3rd vendors with good products that I can buy off the shelf?? Thanx
> guys!!
>
> -Austin
> Vipertruck >>

Why dont you find an local Amsoil dealer and not have to worry about adding
'friction modifier' crap? Amsoil gear lubes cover this need, plus it is
better than any stuff you will be able to buy a Pep Boys. My front diff
takes 2.6pints and my rear diff takes 4.4pints. Do yourself a favor and just
pull the diff cover off, if you are putting in an LSD I guess you will have
to pull the diff cover off anyways....this way you will be able to get 100%
of the fluid out and you will be able to clean all internal parts. Good
Luck,
Kyle
93 Dakota 4x4 V6



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:50:01 EDT