Coil wire would be good. You can remove all the plugs at once or just one
at a time. Either way, you'll get the readings you need.
- Bernd
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of IRONWILL30@aol.com
Sent: Thursday, March 30, 2000 9:13 PM
To: dakota-truck@buffnet.net
Subject: DML: compression check
what do you have to disconnect (ignition) to do a compression check? Coil
.ect thanks.
Paul Finley '94cc 4x4 V6 5spd.
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:50:14 EDT