I think i recall using a 94.5
you can always head up to advance and try them on .... all ya need is a
15mm socket,and wrench... =-)
__________________________________________________________
Tim Berry -- Chesapeake, VA
`97 SLT 318 auto CC 2x4 LSD:
Dual's w/Flowmaster, Homemade K&N GEN II, 2 Electric Fans
180 T-stat, MSD 8.5 wires, Traction Bars, F&B Stage 1, Mod'd intake
ASP Pullies (Crank/Alt), Trans Go Shift Kit, BFG 275/60's, MP Puter
BEST 1/4 15.488 @ 86.23 MPH
ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ
----- Original Message -----
From: "Jon Smith" <fast4x4@bellsouth.net>
To: <dakota-truck@buffnet.net>
Sent: Tuesday, April 04, 2000 4:33 Dark
Subject: DML: Re: Belt part # to use with ASP pulleys
> Todd, my #'s have worn off but I wanna say it's like 92.5"... 730 K6 is
the
> pn for PS bypass w/ the ASP crank, that's 73"
> _________________________
> Jon Smith--Raleigh, NC
> 95 318 4x4 CC auto
> www4.ncsu.edu/~jdsmith4
> fast4x4@bellsouth.net
> ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ
>
>
>
> > Anyone have the belt part # or lenght that works with the ASP crank
pulley
> > on a 98 318 with air?
> >
> > Thanks, Todd
> >
> >
> >
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:50:36 EDT