Re: Now tight is too tight?

From: Bernd D. Ratsch (bernd@texas.net)
Date: Wed Apr 12 2000 - 09:41:23 EDT


Set them to 0 - 1/4 turn at most.

- Bernd

----- Original Message -----
From: "Wisotzkey, Rich" <Rich.Wisotzkey@gd-wts.com>
To: <dakota-truck@buffnet.net>
Sent: Wednesday, April 12, 2000 7:56 AM
Subject: DML: Now tight is too tight?

> Went to fire up the 'ol Dak last night after installing the roller rockers
> (amont other things). When the starter spun, there didn't seem to be as
> much compression resistance as I remember. It wanted to run, but only
> sputtered around 1000rpm even with the TB opened up. Didn't leave it run
to
> long like this because I need to break in the new cam also. It sounded
like
> I wasn't getting a good closed compression stroke.
> As I recall, the manual says not to soak the lifters prior to installing,
so
> I didn't, even though they have been sitting for three months. I
initially
> set the rockers around 1/3 loading, and when I finished tightening
(locking)
> them down, believe they are more like 1/2 - 2/3 turn loaded. Is this to
> much? Could this be my problem? Any help appreciated.
> Rich - Ashburn, VA
> (the novice rocker installer)
>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:50:41 EDT