After doing my final analysis of the ATI Supercharger kit for the 4.7L and
the few tweaks make it performance efficient, you will be looking at around
347HP - 350 HP at the rear wheel. And around 425 lb of torque.
----------------------------------
Steven St.Laurent
Test Engineer
Test Branch, GSD, MCTSSA
MARCORSYSCOM, USMC
Tel: (760) 725-2296
stlaurents@mctssa.usmc.mil
mailto:Saint1958@home.com
-----Original Message-----
From: Steve St.Laurent [mailto:saint1958@home.com]
Sent: Tuesday, April 11, 2000 3:16 PM
To: dakota-truck@buffnet.net
Subject: DML: RE: 4.7 Supercharger Kit
Just call them for the 8-10 PSI version but run out. This edition will push
the 379 HP at the rear. You will need either a flash on the current chip
for 500.00 or buy the Mopar Hi Po version for 309. The cost on the kit when
next stock is made availed is around 4250.00 minus 10 percent off. They
have the 12-14 version but will need some special mod be done to the heads,
fuel system etc.
=================================
Steve St.Laurent
2000 DC Dakota 4.7, CC, 4x2 (soon 330HP)
2000 Roush Mustang Stage II (awaiting the new SC)
"Those that can give up essential liberty to obtain a little temporary
safety deserve neither liberty nor safety." -Ben Franklin
http://www.geocities.com/Yosemite/Cabin/4382/index.html
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net] On Behalf Of Rick
Sent: Tuesday, April 11, 2000 10:32 AM
To: dakota-truck@buffnet.net
Subject: DML: 4.7 Supercharger Kit
Golden West is making a supercharger kit for the 4.7
They are using the ATI pro charger P600B compresser
with an intercooler running 6 psi of boost and making
310 HP at the wheels.
The kit is 3895$
there phone number is 303-346-5232
Turbo Rick
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:50:43 EDT