Well, I finally worked up the courage to cut my trans cooler line and
install the Autometer trans temp manifold. Really nice piece! I now
have a intake manifold vacuum guage and a trans temp guage in the
autometer custom guage pod on the A-pillar. I'll try to get some pics
and scan 'em in for anyone who wants them. I used the Sport-Comp 2 1/16
guages for this install. Feel free to ask Q's!
Cale
98c318sporty
mschwall@flash.net wrote:
>
> On Fri Apr 14 09:54:11 2000, dakota-truck@buffnet.net wrote:
>
> > I tried the last part on the holding the brake pedal down and tried to push
> > the accelerator pedal and it still creep forward.
> >
> > ----------------------------------
> > Steven St.Laurent
>
> Yeah, got to press hard, and not give it too much gas. You want just enough
> torque to get the rear end to hook up without any wheel spin. If your spinning
> the wheels on launch, reduce your stage rpm. Best to practice on the street.
> Just don't do it too much at a time, you'll cook the tranny fluid.
>
> Mike Schwall
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:50:45 EDT