>>Mike, is the stock rad. big enough to cool the 360? I sure hope it is!
and I
didn't know I could get eletric fans in between the evaporator and rad.
By
the way, I measured my 360's new home (My engine compartment) 31.5" from
firewall to rad.<<
stock won't cut it... but! A radiator out of a Magnum 318 will, and it'll
bolt right up. Shelby's had and electric fan in between the rad. and
condenser. You have to move the condenser forward a little bit with
washers, but the fan will go right in. You may not need to mount the fan
in front of the rad. like I have to, since you have the longer nose....
-mike d.
---> Yorktown, Va.
"PROJECT 13's" ... slammed 88 Dakota: Magnum 360 swap in progress!
miggitymike@juno.com
http://members.xoom.com/dakotaperf/index.html
________________________________________________________________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk! For your FREE software, visit:
http://dl.www.juno.com/get/tagj.
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:50:47 EDT