Thanks very much Aaron,
The bracket I'm talking about is the triangle shaped one that has two nuts
welded on to it. These two nuts are the ones causing me grief... I just
don't want to force it and accidentally strip them. Thanks again.
Norah
current: '98 Dakota Sport black 4x4 CC V8/5.2L/Auto
current: '95 Dakota Sport white 4x4 Reg Cab V6/3.9L/5spd
RIP: '95 Dakota Sport black 4x2 CC V6/3.9L/Auto
previous: '93 Dakota blue 4x2 CC V6/3.9L/Auto
> -----Original Message-----
> From: owner-dakota-truck@buffnet.net
> [mailto:owner-dakota-truck@buffnet.net]On Behalf Of A. S.
> Sent: Thursday, April 20, 2000 7:41 AM
> To: dakota-truck@buffnet.net
> Subject: RE: DML: skid plate installation on '95
>
>
> Norah,
> I'll pull one out of mine the first chance I get and see. I'll let you
> know if someone doesn't before I do.
> --Aaron--
> 95 DSRC 4x4 V6
>
> >From: "Norah Bleazard" <nbleazard@home.com>
> >Reply-To: dakota-truck@buffnet.net
> >To: <dakota-truck@buffnet.net>
> >Subject: RE: DML: skid plate installation on '95
> >Date: Thu, 20 Apr 2000 06:57:14 -0400
> >
> >Thanks Aaron and Frank,
> >
> >We've finally got all the parts. I have one question regarding
> the bracket
> >that the fuel tank skid plate attaches to. Does anyone know
> what size bolt
> >and thread are needed for this part. I've got the 5/16ths" fine
> thread and
> >the coarse thread and neither one seems to fit. The fine thread doesn't
> >thread in all the way down. They both start and then bind up. The 1/4"
> >just falls right through. Is it some metric size?
> >
> >I'd appreciate any help on this.
> >
> >Thanks in advance,
> >Norah
> >current: '98 Dakota Sport black 4x4 CC V8/5.2L/Auto
> >current: '95 Dakota Sport white 4x4 Reg Cab V6/3.9L/5spd
> >RIP: '95 Dakota Sport black 4x2 CC V6/3.9L/Auto
> >previous: '93 Dakota blue 4x2 CC V6/3.9L/Auto
> >
> >
>
> ______________________________________________________
> Get Your Private, Free Email at http://www.hotmail.com
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:50:50 EDT