Dan,
I'm running the Hughes HER0612AL cam in my '96 318. I've only had it down
the road twice so far, so it's a bit early for concrete conclusions. I need
to do a little more tweeking to get everything running correctly. But I
would be lying if I didn't say between the M1 intake and this cam, the Dak
would fly it I had wings. I need a tach with more than 6000 rpms now. (I
also changed the rockers and springs.) More detailed data coming after
"tweeking".
Rich - Ashburn, VA
-----Original Message-----
From: Dan Jones [mailto:amishpimp93@hotmail.com]
Sent: Friday, April 21, 2000 1:00 PM
To: dakota-truck@buffnet.net
Subject: DML: cams
Does anyone run a cam in thier 5.2L daks that they like? Im starting to
look for one but havent really had any luck. I looked into the Magnum R/T
Camshaft 5.2L/5.9L #P5249549WA but i heard it was a bit too mild. Im
lookin for something that'll give some good power but will run right now
with a stock computer, i'll upgrade later. Anyone know of a site that has a
good one? Mines a 97' 5.2L 2wd auto. Thanks
________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:50:51 EDT