Tim,
It does actually sound a bit deeper now. It also has a mild lope in it. It
is slower getting out of the hole, but above 3000rpm, it just keeps pouring
out the power. You can tell a difference. I am still tweeking and touching
up, getting ready for Carlisle, but I am going to dyno it once finished. I
just hope I can squeeze past the "emission nazi's" this fall.
Rich
-----Original Message-----
From: Tim Berry [mailto:coolva1@home.com]
Sent: Friday, April 21, 2000 7:16 PM
To: dakota-truck@buffnet.net
Subject: DML: Re: RE: cams
how much change in idle tone was there... can you notice the cam? (i've been
lookin at the next one up =-)
__________________________________________________________
Tim Berry -- Chesapeake, VA
`97 SLT 318 auto CC 2x4 LSD:
Dual's w/Flowmaster, Homemade K&N GEN II, 2 Electric Fans
180 T-stat, MSD 8.5 wires, Traction Bars, F&B Stage 1, Mod'd intake
ASP Pullies (Crank/Alt), Trans Go Shift Kit, BFG 275/60's, MP Puter
Edelbrock Headers/Y-pipe, Exhaust cutout B4 cat
BEST 1/4 15.488 @ 86.23 MPH
ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ
----- Original Message -----
From: "Wisotzkey, Rich" <Rich.Wisotzkey@gd-wts.com>
To: <dakota-truck@buffnet.net>
Sent: Friday, April 21, 2000 5:47 Dark
Subject: DML: RE: cams
> Dan,
> I'm running the Hughes HER0612AL cam in my '96 318. I've only had it down
> the road twice so far, so it's a bit early for concrete conclusions. I
need
> to do a little more tweeking to get everything running correctly. But I
> would be lying if I didn't say between the M1 intake and this cam, the Dak
> would fly it I had wings. I need a tach with more than 6000 rpms now. (I
> also changed the rockers and springs.) More detailed data coming after
> "tweeking".
> Rich - Ashburn, VA
>
> -----Original Message-----
> From: Dan Jones [mailto:amishpimp93@hotmail.com]
> Sent: Friday, April 21, 2000 1:00 PM
> To: dakota-truck@buffnet.net
> Subject: DML: cams
>
>
> Does anyone run a cam in thier 5.2L daks that they like? Im starting to
> look for one but havent really had any luck. I looked into the Magnum R/T
> Camshaft 5.2L/5.9L #P5249549WA but i heard it was a bit too mild. Im
> lookin for something that'll give some good power but will run right now
> with a stock computer, i'll upgrade later. Anyone know of a site that has
a
>
> good one? Mines a 97' 5.2L 2wd auto. Thanks
> ________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:50:53 EDT