I just can't buy it... A couple of years ago, Sam Wilcox took a van .030
360, cam, TB, Chip, heads, convertor/shift kit, 3.91's, ram air and put it
in his Gen II Auto and run's 13.70's @ 99 mph on radials with cast iron
manifolds. I ran 14.20's @ 99 mph in a Gen II 5-speed 318, cam, TB, Chip, no
head work, stock clutch, 3.91's, ram air and cast iron manifolds. He run's a
pinion snubber on a 8 3/4" rear, I ran a stock 8 1/4" rear. I'd say that's
pretty close in parts match up except for the cubes. I suppose what I am
getting at is that I have alot of faith in the 318's power.
Kuk
http://members.spree.com/family/msdng
> A couple years ago Eric Kurtz took a 318 5 spd Dak with headers, exhaust,
> MP computer, yada yada and ran high 14's. Same truck, but a 360 out of a
> Van in it, put the same mods from the 318 onto the 360, used the stock
> 360 computer, and ran high 13's... same truck, same mods, different
> block...
> oh, and 360 had more miles on it than the 318 did....
> enough to convince me =)
>
> -mike d.
>
> ----->Yorktown, Va.
> PROJECT 13's!! ... MAGNUM 360 going into my slammed 88 Dakota!!!
>
> http://members.xoom.com/dakotaperf/index.html
> miggitymike@juno.com
>
> ________________________________________________________________
> YOU'RE PAYING TOO MUCH FOR THE INTERNET!
> Juno now offers FREE Internet Access!
> Try it today - there's no risk! For your FREE software, visit:
> http://dl.www.juno.com/get/tagj.
>
_____________________________________________
NetZero - Defenders of the Free World
Click here for FREE Internet Access and Email
http://www.netzero.net/download/index.html
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:51:11 EDT