Yep! That was me!!
the specs Mr. Blows posted are correct =)
I still have it sittin' here, lookin' all pretty in the box.
e-mail me privately and we'll discuss shipping and stuff if you're still
interested!
-mike d.
----> Clubless in Yorktown, Va.
PROJECT 13's!! ---> 88 Dakota 360 Magnum swap in progress!!
miggitymike@juno.com
http://members.xoom.com/dakotaperf/index.html
On Thu, 18 May 2000 22:43:21 EDT Gmblows@aol.com writes:
> I think that was Magnum Mike, I think this was what he had.
>
> Part Number: 704121
> Grind Number: COMPUCAM 2030 COMPUCAM HYD. ROLLER
> Engine Ident: 1992-93 DODGE MAGNUM V8 5.2-5.9 LITRE
> VALVE SETTING: INTAKE .000 EXHAUST .000 ----> HOT
>
> LIFT: INTAKE @CAM 286 @VALVE 458 ROCKER ARM RATIO
> EXHAUST @CAM 292 @VALVE 467 1.60
> ALL LIFTS ARE BASED ON ZERO LASH AND THEORETICAL ROCKER ARM RATIOS
> CAM TIMING OPENS CLOSES ADV DURATION
> @ .004 INTAKE 19.0 BTDC 61.0 ABDC 260 °
> TAPPET LIFT EXHAUST69.0 BBDC 15.0 ATDC 264 °
>
> VALVE FLOAT 6500
>
> CAM TIMING OPENS CLOSES MAX LIFT
> DURATION
> @ .050 INTAKE (7.0) ATDC 31.0 ABDC 109 °ATDC
> 204 °
> TAPPET LIFT EXHAUST 43.0 BBDC (15.0) BTDC 119 °BTDC 208 °
>
>
>
> << who was it that advertised a crane cam for sale? Can i get specs
> on it or
> is
> it sold.
> Rob >>
________________________________________________________________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk! For your FREE software, visit:
http://dl.www.juno.com/get/tagj.
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:51:20 EDT