My Mods WAS: Re: MP microcontroller id?

From: Bob Tom (tigers@bserv.com)
Date: Sun May 21 2000 - 22:58:39 EDT


Hi, Terry

At 08:43 PM 5/21/00 -0400, you wrote:
>Bob, your weight, hp, torque and 1/4 mile is very close to mine. Only
>difference is you have a 5.2 and I have a 5.9. Could you tell me what
>mods you have? Just curious. :-)

Sure ... we even have the same colour.

Intake side: MPI
                   F&B Stage 1 tb
                   Ram air box with dual 4" air ducts &
                     14 x 2.8 K&N filter

Engine: MP cam, lifters, retainers, guides, pushrods,
                      valve springs, 1.6 alum. roller rockers
                   3923 Autolites
                   Accel Supercoil
                   MP 7.5 mm wires
                   180 tstat, Redline Water Wetter, short belt
                   '96 MP PCM

Tranny: Transgo kit (erratic manual upshifts @ WOT)

Exhaust side: Leach ceramic-coated headers
                  Gibson dual rear-exit cat-back

Diff. 3.92 SG

Track tires: 26" BFG drag radials @ 18 lb

I think that's it. My dyno figures were with 3.55SG, 14 x 2.25 K&N open air
cleaner, stock coil, OE belt, and 28" all season tires.

Bob. Ont, Canada. '97 Dakota CC, 5.2L, 4x2, 3.92 SG, auto., 4350 lb.
RWHP: 226.2 (corrected) 231.2 (measured)
RWTQ: 332.5 (corrected) 340.0 (measured)
PB: 14.857 @ 91.67



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:51:22 EDT