>>Stock cr is 9.5:1??? What would be a good cr to shoot for and still
use
93octane... Hopefully I can get ahead of some bills and be able to buy
the
parts I need to make this motor 1 bad mutha :-) I'd like to see at
least
400 at the crank..<<<
tock CR is 9:1 if you're lucky. The one I got was actually 8.6:1. A good
CR to go with for a street motor is 10:1 so you can still run pump gas.
Keep in mind that you will need a hot cam to run this CR or it will ping.
A lot of what you know about 318's goes out the window when 360 comes in
to play. If you plan to run N2O or a blower, stick with the stock CR to
prevent detonation... yadda yadda yadda...
-mike d.
----> Clubless in Yorktown, Va.
PROJECT 13's!! ---> 88 Dakota 360 Magnum swap in progress!!
miggitymike@juno.com
http://members.xoom.com/dakotaperf/index.html
________________________________________________________________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk! For your FREE software, visit:
http://dl.www.juno.com/get/tagj.
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:51:22 EDT