RE: Ignition, wires, & plugs

From: Bernd D. Ratsch (bernd@texas.net)
Date: Mon May 22 2000 - 19:20:28 EDT


Hehehe...but they're still better than the factory wires. I used to run
Jacobs back in the early 90's but have since switched to Taylor and
SplitFire. (Had the MSD's on the truck originally but didn't like the Red
color with the Silver/Blue scheme.)

- Bernd

-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of mrdancer
Sent: Monday, May 22, 2000 5:29 PM
To: 'DML'
Subject: Re: DML: Ignition, wires, & plugs

heheh - Good luck on the Jacobs wires, I went thru two sets of 'em (8mm and
8.5mm) before giving up and getting the Magnecors. They (Jacobs) have a
lifetime warranty, but their return/replacement procedure is such a hassle,
you'd almost rather just buy new wires.... and I really question their
quality since their 8.5mm wires were arcing and cross-firing (the Magnecors
don't)....

--
'92 Dak CC 2wd 318 3.55
'84 GoldWing Interstate



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:51:22 EDT