Hehehe...ya beat me to it Kyle.
Those are good mods that will work nicely on the V6.
- Bernd
http://www.toycrusher.com
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Kyle Kozubal
Sent: Monday, May 22, 2000 7:51 PM
To: dakota-truck@buffnet.net
Subject: DML: Re: looking for ideas and advice
> also want to upgrade the ignition system. was thinking about an msd coil
> and module but would like to have the groups opinions and suggestions
> for what to put in. i will be adding magnecor wires so there shouldnt be
any problems with
> any system.
>
> also what type of plugs seem to be the general consensus among the
> group. i get the idea that autolites seem to be popular.
Brent,
I have tried alot of spark plugs out, both with and without my MSD Ignition,
and without a doubt the Autolite Coppers are a great plug, inexpensive also.
If you want to get an aftermarket coil, I highly suggest Accel's Super Coil.
It only takes about 2 minutes to swap it in. The best thing about this coil
is that is utilizes the stock location and the stock coil connector. So
installation is a breeze. Simply disconnect the stock coil connector, unbolt
the 2 bolts and take the coil off, bolt on the new coil and plug it in. Be
sure to use MSD 8873 Universal Wiring Harness if you plan on adding an MSD
Ignition Box. I am currently running the MSD 6-Offroad Ignition, MSD RFI
Noise Filter, MSD Universal Wiring
Harness, MSD 8.5MM SuperConductors, Accel Super Coil, Borg Warner Select
Brass Cap/Rotor, and Autolite Copper Plugs(gapped at .050). Be sure to
upgrade to a good quality Brass terminal distributor cap and a good rotor. I
love Borg Warner Select's ignition products. Let me know if you have any
questions or need help. GenII V6 Daks RULE!!!
Kyle
93 Dakota 4x4 V6....Real Dakotas Are Built, Not Bought!!!
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:51:23 EDT