In a message dated 5/22/00 10:29:10 PM Eastern Daylight Time,
Coughlin@centuryinter.net writes:
<< Hey man,the t-stat housing is not in the upper rad. hose on the 4.7L.That
inline fitting is just the cap and fill.The t-stat housing is in the lower
left corner(looking at the the engine from the front,passenger's side of the
truck) of the front cover.The lower hose attaches to the t-stat housing.Will
2000 reg. cab 2wd 4.7L/5-spd/3.92sg(9.25in). coughlin@centuryinter.net >>
Its looks that way, but open the cap on the "upper rad hose" and stick your
finger in there, mine has a t-stat there.
Boog
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:51:23 EDT