On Thu, 25 May 2000 FalRan66@aol.com wrote:
> can i do this with no cooling problems or any problems, i have a spare motor
> with 40k on it and plan on puttin in my truck and doin up the original motor.
> any comments or suggestions
>
Nope, I'm sorry to say it can't be done. The maximum recommended
overbore for the 318 is .040". In order to get to 360 cubes, you'd have
to remove a full .51" of material. (You'd need a bore of about 4.42" due
to the 318's shorter stroke. Even the 360 only has a bore of 4.00".)
You could get it there by stroking it of course, but unless you can get
the parts for next to nothing, you'd probably be better off going out
and buying a 360 to start with; maybe even a fresh crate motor.
-Jon-
.--- jon@dakota-truck.net -- or -- stei0302@cs.fredonia.edu ------------.
| Jon Steiger * AOPA, DoD, EAA, MP Race Team, NMA, SPA, USUA * RP-SEL |
| '92 Ram 150 4x4 V8, '96 Dakota V8, '96 Intruder 1400, '96 FireFly 447 |
`---------------------------- http://www.cs.fredonia.edu/~stei0302/ ---'
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:51:26 EDT