Re: can i bore a 318 to a 360

From: Aaron (acolona@i-55.com)
Date: Thu May 25 2000 - 21:15:24 EDT


well, your smoking some good crack. the bore AND stroke are different.
however, the bore is only slightly bigger, most of it is in the stroke.

----- Original Message -----
From: <SFLOGAN@aol.com>
To: <dakota-truck@buffnet.net>
Sent: Thursday, May 25, 2000 7:09 PM
Subject: Re: DML: can i bore a 318 to a 360

> ITS THE STROKE THAT MAKE A 318 INTO A 360 NOT THE BORE... YOU NEED THE 360
> PISTON ,RODS,CRANK.AND SOME MACHINE WORK TO TURN A 318 INTO A 360 ALL THE
> BORING IN THE WORLD WON'T DO IT
>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:51:26 EDT