Gee, when I got my cab hi shell from a local shop,
they took off the 3rd tail/cargo lamp and tapped into the
wire there, ran it under the rail, to a disconnect above the taillight
and then to the shells lamp. They dis a neat job, must be a bad
installer. Mike
> From: Todd Abernathy <t_abernathy7@juno.com>
> Subject: Re: DML: New to the list (Jeff)
>
> Jeff,
> Welcome. About three weeks ago I got a Snug-Top put on my truck (it is
> the same as your's except for the rear gears). When they installed the
> shell they removed the rear driver's side lens and tapped into the brake
> light there. If you feel around in the inside rear top corner of the bed
> you'll find that there is a gap between the rail and bed. They ran the
> wire for the third brake light thought that gap. If you do it yourself
> be carefull to not tap into the blinker wire. Also, at this point I
> would NOT recommend a Snug-Top. Good luck.
-- "Thoughtcrime was not a thing that could be concealed forever. You might dodge sucessfully for a while, even for years, but sooner or later they were bound to get you." - George Orwell, Nineteen Eighty-Four http://www.newspeak.com/1984.htm
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:51:28 EDT