Re: ran into my dakota today

From: Preacher (preacher@carolina.rr.com)
Date: Sun Jun 04 2000 - 17:39:18 EDT


Damn... time for you to take a vacation, do not drive or operate heavy
machinery or even think heavy thoughts.... ;-)

Sorry to hear about your Dak, again :-) (Just be glad that it was the truck
and not, say, one of your coworkers you hit!

===============================================
Preacher
99 &1/2 5.2L CC 4x4 SLT+ R/T (Redneck/Truck)
CUSTOM DECALS: http://www.bastaards.org/CustomDecals.htm
Webmaster: http://www.bastaards.org
===============================================

----- Original Message -----
From: Michael Vetere <antonio@montana.com>
To: DML Dakota Mailing List <dakota-truck@buffnet.net>
Sent: Sunday, June 04, 2000 5:24 PM
Subject: DML: ran into my dakota today

> here i am just 1 week after the deer incident and i am unloading some
> stuff off
> my truck into my warehouse (i work as a distributor). i decide to
> reposition one
> of my trucks. well im i going forward towards the side of the pickup.
> when i go
> to hit the brakes, NOTHING. i looked down at the air pressure guage and
> it
> reads 0 lbs. CRASH!! pushed my pickup sideways on the pavement squealing
>
> the tires. so i put the truck in rev. and backed away. door panel was
> dented pretty
> bad, but i was able to pop most of the dents out, all that is left is
> the creases.
> the fender was pushed in beond repair. i was pissed. i hit it pretty
> hard and pushed
> the truck about 5 or 6 feet sideways. THEN as if that wasnt enough,
> while i was
> pushing the dents out of the door the truck overheated and the radiator
> sprung
> a leak. WTF?!?! i am soooo pissed off
> AND TODAY WAS SUPPOSED TO BE MY DAY OFF!!!
> what next?
> mike
>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:51:39 EDT