Re: Phase in distributor

From: Bob Tom (
Date: Thu Jun 08 2000 - 22:17:45 EDT

At 06:56 PM 6/8/00 -0400, you wrote:
>Does anybody know any thing about phasing in a distributor in a 94 3.9L
>5spd Dakota? Dave G.

There is a test (needs to be done by the DRBIII tool or scanner with
capability) called the Set Synchronization Mode. It resets the
distributor or cam sensor or crank sensor to 0 degrees. The PCM
will then readjust the setting to the optimum setting.


This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:51:41 EDT