Jason,
Get offset rims and you will not have a problem with rubbing. I have a 3" Rancho lif 3"
body lift, cranked the torsion bars & swapped out the rear spring blocks for 3" blocks for a total
of 7" of lift. I run 35"x12.50" BFG A/T...no rubbing! I did cut the inner fender to fit the 35"
tires. I had 33" for about 2 months without cutting or rubbing.
Check out my web page for pics...
-Mike Brown
Pasadena, MD.
97-Dakota Club Cab,5.2L, 4X4, 7" Lift, 35"x12.50" BFG A/T.
http://www.geocities.com/mbrowwwn/index.html
-----Original Message-----
From: jason nahrgang [mailto:jasonnahrgang@hotmail.com]
Sent: Friday, June 09, 2000 9:35 AM
To: dakota-truck@buffnet.net
Subject: Re: DML: lift, tires, etc...
I'm looking at the rancho lift too...maybe we can get a group buy going.
32" tires will fit with minimal rubbing by the front of the tire on the
frame. I've had 32s for 6 months and that's the only problem I've had...a
non-issue really. Could use 3.92s instead of 3.55s though.
Jason Nahrgang
Moss Green '97 V8 4x4 SLT+ 5spd
Custom tow hooks, Quick D TB
3" Gibson, K&N homegrown
Bilsteins up front
32x11.50 Pirelli Scorpion ATs
>From: xjruss@excite.com
>Reply-To: dakota-truck@buffnet.net
>To: dakota-truck-digest@buffnet4.buffnet.net
>Subject: DML: lift, tires, etc...
>Date: Wed, 7 Jun 2000 17:25:12 -0700 (PDT)
>
>Does anyone have any experience or info on the Rancho 3" lift for the 97-99
>4x4 Dak? What any other lifts? Also, will bigger tires fit without any
>lift?
>
>-thanks
>Russ
>'99 CC SLT 4x4 5.2
>
>
>
>
>
>_______________________________________________________
>Get 100% FREE Internet Access powered by Excite
>Visit http://freelane.excite.com/freeisp
>
________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:51:41 EDT