Not from what I saw on the surfaces...no cross-hatch pattern. Plus, the
gaskets from Mopar have their own small sealant bead on them anyway. Never
had a gasket leak yet.
- Bernd
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of frank golembieski
Sent: Tuesday, June 13, 2000 8:33 PM
To: dakota-truck@buffnet.net
Subject: Re: DML: Gear Drive Saga...
polishing wheel ? thoses surfaces have that crosshatch
blanch ground pattern to keep the gasket in place
under preasure
ok at least it is not mine
good luck
Frank 94 5.2 spoR/T
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:51:45 EDT