The 1.6:1 Roller Rockers are. No need to remove any baffles. Don't know
about the 1.7's though.
- Bernd
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Chuck Robbins
Sent: Tuesday, June 13, 2000 10:48 PM
To: dakota-truck@buffnet.net
Subject: DML: oil baffles (Dester)
I thought the 1.6 were the same height as stock and that only the 1.7's
needed the oil baffles out?
Chuck Robbins
'99 Dakota Sport
http://www.members.home.com/clrobbins/dakota.htm
> Hrm.. I might be buying a set. I don't have oil baffles in my stock valve
> covers and it's blowing oil into my breather.
>
> hey! is this where all my white smoke out the tailpipe could be coming
from
> in the morning? it sucks it in the intake, and when I start it in the
> morning, it's accumilated at the piston rings so puff puff. smoke?
Maybe
> I'm just thinking too hard.
>
> I hope these valve covers are "taller" than the stockers..
>
> -Dester
>
> 97 Dakota CC v6 auto
> JBA Headers, K&N Gen-2 setup, ASP underdrive pullies, upgraded 2.5"
y-pipe,
> Jacob's ignition, ported TB, 1.6 roller rockers, electrical fan, 180 stat,
> and much more...
> www.angelfire.com/ks2/Dester223/home.html
> PB 1/4 mile: 17.221@79 MPH
>
>
>
> << Mopar does make chrome valve covers for our magnum v6's. Jeg's
> sells them for $69.99 (p/n 312-P4452042). They're not the best looking
> covers out there, but they do shine ;-) I tried to locate a picture for
you,
> but I couldn't find one. I'll keep looking though. >>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:51:45 EDT