Don't for get the 1/4" NPT Plug that goes into the manifold. (Teflon paste
works great to seal it up as well...not required though.)
- Bernd
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Jon Smith
Sent: Wednesday, June 14, 2000 10:45 PM
To: dakota-truck@buffnet.net
Subject: Re: DML: IAT Relocation V-8
Drill bit of the appropriate size, and some RTV to make sure it's sealed up
good
> Since the IAT has come up again in recent posts, I decided it was time to
move
> the IAT to my K&N tube! Can anyone give me the scoop as to what I would
need
> for tools, parts (plug, gaskets, RTV), etc.
>
> TIA
> Kurt
> 97 CC 4x4, 5.2, etc.
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:51:46 EDT