In a message dated 06/19/2000 8:38:35 AM EST, bernd@texas.net writes:
<< I was about to say that... ;)
I knew that. : )
That's why I had to get that correction in quick.
- Bernd
----- Original Message -----
From: <Hemipower@aol.com>
Subject: Re: DML: OT: Hesitation in 454?
> In a message dated 06/19/2000 8:11:08 AM EST, Hemipower@aol.com writes:
>
> << n a message dated 06/18/2000 0:44:51 AM EST, william@hiatt.net writes:
>
> << One problem,
> we've always had with it is if you're idling, and jump on the gas, it
> hesitates for about an second second 1/2.
>
> The engine is a '78 Chevy 454. Mods are an Edelbrock Performer Intake
> Manifold, Holley 4barrel carb, >>
>
> I don't know if the Edelbrock is single or dual plane off hand
> but I'd run a single plane and check the jetting on the carb.
> The secondarys may also need to be adjusted to come in a little
> later. HTH >>
>
> Sorry bout that I had an early morning brain fart. I'd run a DUAL plane
> manifold.
>
>>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:51:49 EDT