How much did it cost you for the Viper stripes and what is the true
measurement (width of stripes and the gap)?
-------------------------------------------
Steven St.Laurent
Test Engineer
Test Branch, GSD, MCTSSA
MARCORSYSCOM, USMC
760-725-2506 (DSN 365-2506)
Work:mailto:stlaurents@mctssa.usmc.mil
Home:mailto:saint1958@home.com
-----Original Message-----
From: DICEMAN469@aol.com [mailto:DICEMAN469@aol.com]
Sent: Thursday, July 20, 2000 5:09 AM
To: dakota-truck@buffnet.net
Subject: Re: DML: Re: Re: Vipertruck gets a rear sway bar
In a message dated 7/20/00 2:00:21 AM Eastern Daylight Time,
miggitymike@juno.com writes:
> Hey Austin,
> Your truck is dropped with spindles and springs right? My alingment guy
> told me that you can't align it perfect with the springs, that may be the
> problem...
In that case I should have too much negative camber and I should be wearing
the insides of the tires as opposed to the outsides.
-Austin
1995 Dodge Dakota Vipertruck
www.angelfire.com/ny/vipertruck
Viper GTS paintjob / 3.9L Powerdyne Supercharged @ 10PSI / 30# Injectors /
6:1 FRU / Superchips ECM / 180T-Stat / MSD 6AL / Crower 1.7RR / JBA headers
/
Gibson 3" CatBack / 5spd / LSD 3.55 / 5" Drop / 17x8" 245/35/YR17 front -
17x9.5" 275/40/ZR17 rear / Premier DEH-900R head unit / Two 12" Solobarics
ran by Kenwood PS400M / Two 8" Aura midbasses ran by Kenwood PS-300 / Two
6.5" Midranges ran by Kenwood KAC-626 / Four Lanzar Tweeters ran by Kenwood
KAC-626 / And so many, many other things!!
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:52:48 EDT