Re: Viper brakes

From: jdharmon@earthlink.net
Date: Tue Jul 25 2000 - 22:46:14 EDT


They may have upped the price lately. I think we can get a group buy at $650 a
set.

Stlaurent Mr Steven wrote:

> You sure on that price? I thought they were 800.00 for the pair, to include
> the steel lines.
>
> -------------------------------------------
> Steven St.Laurent
> Test Engineer
> Test Branch, GSD, MCTSSA
> MARCORSYSCOM, USMC
> 760-725-2506 (DSN 365-2506)
> Work:mailto:stlaurents@mctssa.usmc.mil
> Home:mailto:saint1958@home.com
>
> -----Original Message-----
> From: jdharmon@earthlink.net [mailto:jdharmon@earthlink.net]
> Sent: Monday, July 24, 2000 11:08 PM
> To: dakota-truck@buffnet.net
> Subject: Re: DML: Viper brakes
>
> You are correct. minimum 17 inch wheels for any of the brake upgrades for
> the
> front. The rear upgrade is from Stainless Steel Brakes. Very smooth kit.
> Easy
> to install on the Dakota. Retail around $600
>
> Jim
>
> Mark Pryer wrote:
>
> > If they are bigger rotors you will have to keep the 17 inch wheels on
> > because they won't fit with the caliper on and the 15 inch wheels. If
> they
> > do it will be very close. But I am not sure. Might ask around.
> > Mark
> > ----- Original Message -----
> > From: <jdharmon@earthlink.net>
> > To: <dakota-truck@buffnet.net>
> > Sent: Monday, July 24, 2000 7:03 PM
> > Subject: Re: DML: Viper brakes
> >
> > > no sure bolt on. Try Stillen for their kit. www.stillen.com
> > >
> > > Charles Wyman wrote:
> > >
> > > > I remember seeing a while back a post about putting a Dodge Viper
> front
> > disk brakes on there Dak as a direct replacement. How did this go? Is it
> > possible to put them on my 2000 Durango? I'm planning on buying a
> > supercharger in a few months and would like the extra braking power. Will
> > upgrading to the larger brakes effect my ABS..I have 4 wheel ABS? I
> > currently have the 17"x9" R/T wheels, but I'm also going to be using my
> > stock 15"x8" wheels with 31"x10.5" tires (for winters). What is the part
> > number for the brake assembly?
> > > >
> > > > Also, is it possible to convert the rear drums to disks? How will
> this
> > effect my ABS? Has anyone done this? Is it worth it?
> > > >
> > > > ______________________________________________________________
> > > > Chuck
> > > > '00 Flame Red Durango SLT+
> > > > 5.9L, 4x4, 3.92 LSD, R/T wheels (Goodyear Eagle GT II 275/60/R17)
> > > > 2.5" Dynomax Magnum Race Series cat back exhaust, Mobil 1 oil & filter
> > > > Quick-D T-body & intake, Mopar Performance PCM, Autolite 3923 plugs
> > > > best 1/4 mile (stock): 16.08 @ 84 mph
> > > > www.geocities.com/papa_c_d/
> > > > cewyma@roushind.com
> > > > ______________________________________________________________
> > >
> > >



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:52:49 EDT