Uhhhh....I don't think you can stuff that into the filler hole. ;)
The cover needs to be removed to replace the factory setup. Have a shop
take care of this for you unless you have a dial indicator to set the
backlash on the gears.
- Bernd
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Alex Harris
Sent: Thursday, August 03, 2000 5:10 PM
To: dakota-truck@buffnet.net
Subject: DML: RE: RE: Rear gear ratio
> About $500 and that should change out your diff to a 3.90:1
>
> - Bernd
>
Bernd, do I just stuff that into the filler hole or do I have to unbolt the
cover?
- Alex
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:53:15 EDT