I appreciate it, the instructions were good, but your
description helped clear it up. Seth
--- Preacher <preacher@carolina.rr.com> wrote:
> At 01:09 PM 8/11/2000 -0700, you wrote:
> >Hey, Igot the DML sticker. Thanks, it looks cool.
> I'm
> >gonna put it on after work today. Any tips on
> putting
> >it on? I didn't realize that it was more than 1
> piece.
> >I'll try to follow the instructions, but any
> >suggestions would help. Thanks Seth
>
> Makes sure the window is perfectly clean. Vinegar
> and water works well.
>
> Then spray the alchohol & water mixture liberally!
> LOTS !
>
> Position the sticker and use a hard rubber squeegee
> to get all the extra
> water out. I use an old plastic spatula with the
> handle gone..
>
> After you have gotten as much of the water out as
> possible, use your finger
> to outline each section and push any additional
> water out from under the vinyl.
>
> Lightly dry any standing water around the paper and
> slowly peel back the
> paper. Watch the small bits, sometimes they want to
> stick.
>
> Now again, run your finger over each section to make
> sure they are sticking
> properly and force any air bubbles towards the edge.
> Large bubbles can be
> lanced with a needle and as it drys they will
> shrink.
>
> DO NOT, under any circumstances, wash that window
> for 48 hrs. Rain won't
> hurt it but any chemicals may cause problems.
>
> Hope this helps!
>
>
-----------------------------------------------------------------------------------------
> Preacher
> 99 1/2 CC 4x4 SLT+ Redneck/Truck
> http://www.bastaards.org
> http://www.bastaards.org/CustomDecals.htm CUSTOM
> DECALS!
>
-----------------------------------------------------------------------------------------
>
>
__________________________________________________
Do You Yahoo!?
Kick off your party with Yahoo! Invites.
http://invites.yahoo.com/
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:53:22 EDT