Holy cr@p, 3 questions in one post I can answer!
rsuter@bizfon.com wrote:
>
> Is the center console "cover" supposed to be spring loaded?
I don't have a spring in my '99. Pretty sure there isn't supposed to be
one.
> An aftermarket bedliner was in this truck when I picked it up and
> covers up all the tie-downs. How is it accomplished? Just an opening in the > bedliner exposing the tie-downs? A rubber "flap" to keep the water out,
> maybe?
Just holes cut in the liner. A drill for a starter hole (be careful!)
and snips would probably work best if you don't want to remove the
liner. The Mopar liner has holes, I'm surprised yours doesn't either.
I don't have any covers, everything just drains.
> How does the dash bezel come off in order to remove the radio? My 1992 > had torx screws all the way around, but I see no such screws on the 1999. I > assume it just pulls off, but fear breaking it if I just start yanking.
Squeeze the top part and pull gently. Once you get one clip undone the
rest will just follow. The key word is "gentle" - slow and steady is
the key. Shift to 1st if you have an auto, it'll make things easier.
And tilt the steering wheel all the way down.
-- -andyhttp://home.twcny.rr.com/andylevy/ --- andylevy@bigfoot.com ------------------------------------------------------------- "I spilled spot remover on my dog. He's gone now..." --- Steve Wright -------------------------------------------------------------
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:53:26 EDT