Now that you mention the specifics...got it.
- Bernd
----- Original Message -----
From: "Mitchell Carson" <Mitchell.Carson@dalsemi.com>
To: <dakota-truck@buffnet.net>
Sent: Tuesday, August 22, 2000 11:12 AM
Subject: Re: DML: MSD ignition install
> Hi Bernd,
>
> You're comparing apples and oranges...we're on completely different
wavelengths. A CB radio operates near 27 MHz. My amateur radio operates
between 144 and 148 MHz. They're absolutely and totally different. I've
tested the MSD setup with my 10 meter radio (operates between 28 and 30 MHz)
and there is no noise there...nor is there noise in the AM/FM/CD radio. The
noise is only present in the 144 to 148 MHz range. I guess I could borrow a
spectrum analyzer to prove my point.
>
> Again, I'll bet that the MSD unit is not compliant with FCC Part 15. I'll
know more once MSD Tech Support responds to my questions.
>
> -Mitch
>
> > From: "Bernd D. Ratsch" <bernd@texas.net>
> > Subject: Re: DML: MSD ignition install
> >
> > I still say there's something else wrong. My Cobra CB doesn't have ANY
> > noise what-so-ever coming out of it. Even with the older MSD-6 box.
> >
> > - - Bernd
>
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:53:34 EDT