> DML,
> How do you keep the fog's on when you turn on the hi beams?
> On my 97 they go off when i try to use both....
> Tia, Hop
> 97 cc SLT 4x4 auto 3:55 5.2L
Check out the following postings from a.a.d.t.
=====================================================
Just insert the bare wire into the terminals. That's all I did and it works
fine. I don't understand why you are having such a hard time with this. If
you are using the number 4 and the number 3 terminals you should have no
problem.
1 4 2
| | |
_ 5
_ 3
This is how the layout of the terminals is, you want to use the one in
the middle on top, that is number 4, and the bottom one, that is number 3.
Just insert the wire into the fuse panel where the relay would plug in and
your all set.
>I tried this. The terminal strip on #4 is too deep.
>I don't think the spade actually contacts the terminal.
>I purchase a narrower spade and the crimp portion
>makes contact with the top surface of the fuse/relay box
>and thus no contact with terminal.
>The truck is a 98 Ram 2500 V-10.
>Subject: Re: How to rewire so driving light are on with high beams
>
>
>> I just did it on my '98 Cummins and it works great.
>>
>> Remove the cover of the fuse/relay box under the hood. The bottom of the
>> cover shows the relay locations. Remove "fog light #2" relay (probably a
>> Siemens relay). Notice the numbering on the bottom side the relay that
>> labels the terminal numbers. Insert a jumper with male spade connectors
>> between the #3 terminal (relay terminal closest to the fender) and the #4
>> terminal (middle relay terminal furthest from the fender). You may have
>to
>> trim the spade connector to get it to fit into the narrower #4 terminal
>> slot. The relay terminal footprint looks something like this:
>>
>> | | |
>> _
>> _
>>
>>
>> The numbering is like this with terminal 3 being closest to the fender:
>>
>> 1 4 2
>> 5
>> 3
>>
>>
>> You do not have to reinstall the relay once the jumper is in place (but
>hang
>> on to the relay so you can reinstall it when you sell the vehicle).
>> > I tried what you said.
>> > I have a 98 V-10 4x4 didn't work.
>> > Nothing really seams to fit in # 4 or 3 far side of fender.
>> > No real connector on far side of fender. On the 98
>> > theres #1 and #2 fog light relay. Please help.
>> > Sincerely,
>> > Mike
>> >
>> > > I would like to have my driving light on with my high beams.
>> > > Does anyone know how to add a diode or such ?
>> > > 98 2500 V-10 4x4
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:53:41 EDT