Sorry for the misprint.....alll the wires read a resistance of below
1000....or 1K.
Any tips on what to check next is appreciated...seein that the dealership
couldn't figure it out (Plugs were already replaced and it made no
difference)
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Kevin Hoegen
Sent: Wednesday, August 30, 2000 7:56 PM
To: dakota-truck@buffnet.net
Subject: DML: Misfiring continues!?
As I had mentioned, I brought the Dak to the dealer because it seemed to be
running on less than 6 cylinders. The dealership came up with codes that
stated the vehicle was misfiring. The dealerships diagnosis was that my
aftermarket Taylor wires were to blame.
Tonight I did an Ohms check of all wires and all had a reading below 1. The
longer ones being at just about one. Is this what I should expect?
I'm goin nuts with this problem as it has plagued me now for about 2 weeks.
-Kevin
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:53:51 EDT